This company’s new, patent-pending pneumatic trip system (photo) with partial-stroke actuation provides quick testing of turbine trip systems while the equipment is still running. There is no disruption to production, and the trip valve will still work if an overspeed…
The Crossover 1540 overhead mixer (photo) features a 0.5-hp motor delivering 3,000 N∙cm of torque for effective mixing in large laboratory, pilot-scale and small production volumes. The portable Crossover is designed to mix up to 200-L (50-gal) drum volumes from…
This company now offers metal-detectable (MD) and X-ray-inspectable (XRI) seal and gasket options on its magnetic separation equipment for gravity-fed and pneumatic-line conveying applications. The new seal and gasket options protect against elastomeric contamination in the processing line. Component parts…
The new TopDrive piston pump system (photo, p. 28) for cleanup applications features a fully-interchangeable drive assembly that allows for easy transitions between hand, solar, electric and top-drive pneumatic pumping without removing the well seal. This feature provides additional flexibility…
The new Twist-Lok dry disconnect coupler (photo) features 316 stainless-steel construction and an integral heavy-duty swivel to aid connection and minimize hose wear. In addition, this new coupler is designed with several safety features for the operator, such as the…
Single unit combines bin discharge and feeding The Gyro Ex Bin Activating Feeder/Discharger (photo) is a combination bin discharger and high-accuracy feeder that provides a turndown ratio of up to 100:1. It uses a radial force to create a uniform…
The GSM-60 hazardous-gas monitoring system (photo) is designed with an internal sampling pump and can use both internal sensors and remote sensor transmitters to continuously monitor up to four gases. The instrument is capable of utilizing an array of sensor…
The Series 1600 horizontal vortex sump pump (photo) features a fully recessed vortex impeller design that provides an unrestricted flow, since the impeller is not normally in contact with the solids being pumped. Industrial process applications include slurries, fragile food…
The SCP Series of pumps (photo) for Class 1 and 2 flammable liquids is designed to minimize hazards associated with transferring flammable or combustible chemicals, such as alcohols, solvents and volatile hydrocarbons. SCP pumps allow for spill-free, environmentally safe transfer…
This company has introduced a new range of low-VOC coatings that provide 100%-solids epoxy lining performance. The coatings are reinforced and are capable of providing longterm protection under industrially corrosive environments ranging from immersion conditions (temperatures up to 180°F) to…