The GSM-60 hazardous-gas monitoring system (photo) is designed with an internal sampling pump and can use both internal sensors and remote sensor transmitters to continuously monitor up to four gases. The instrument is capable of utilizing an array of sensor…
The Series 1600 horizontal vortex sump pump (photo) features a fully recessed vortex impeller design that provides an unrestricted flow, since the impeller is not normally in contact with the solids being pumped. Industrial process applications include slurries, fragile food…
The SCP Series of pumps (photo) for Class 1 and 2 flammable liquids is designed to minimize hazards associated with transferring flammable or combustible chemicals, such as alcohols, solvents and volatile hydrocarbons. SCP pumps allow for spill-free, environmentally safe transfer…
This company has introduced a new range of low-VOC coatings that provide 100%-solids epoxy lining performance. The coatings are reinforced and are capable of providing longterm protection under industrially corrosive environments ranging from immersion conditions (temperatures up to 180°F) to…
The CGS-FlexVu UD10 combustible-gas detection system combines a catalytic-bead gas sensor with a multifunction universal display for detection of a wide range of hydrocarbon gases, as well as hydrogen, in harsh industrial environments. The explosion-proof system is third-party rated for…
The new Masterflex L/S Cytoflow pump head (photo) was developed specifically for pumping live cells and shear-sensitive fluids in biopharmaceutical and microbiology applications. The Cytoflow pump head has a large-diameter rotor, resulting in high flowrates at low motor speeds. The…
Series UP6 electric gear pumps (photo) feature the option for built-in pressure control, whereby a factory-programmed pressure setting is maintained via a microprocessor-based variable pump-speed control circuit that utilizes an internal pressure sensor for loop feedback. UP6 pumps are self-priming…
This company’s Eden sensors (photo) now feature a solid-state, board-level design with radio-frequency identification (RFID) technology for increased resistance to vibration and greater security. RFID technology allows for large sensing distances and its vibration resistance decreases the risk of involuntary…
MT100 Series multipoint thermal mass flowmeters (photo) provide temperature-compensated direct mass-flow measurement of air and gases in large-diameter pipes, stacks and rectangular duct installations, where there are often challenges in achieving successful flowmeter installation and performance. To help overcome issues…
The risk of explosion due to dust is a major operational concern in many industry sectors. To address this, the E-Line vacuum conveyor (photo) is designed to be fitted with either an explosion-venting or explosion-suppression system, based on application requirements.…