Operational troubleshooting guidance is provided for several scenarios involving trapped non-condensable gases in distillation towers Non-condensable gases are often present in distillation towers, either expectedly or unexpectedly. When they do appear, or when the quantity of non-condensable gases varies from…
Predictive maintenance (PdM) programs can provide advanced warning of equipment problems and potential failures. This one-page reference provides brief descriptions of six common predictive maintenance methods. Infrared thermography Continuous monitoring of equipment temperature over time has the potential to identify…
Many factors impact the performance of synthetic filtration media, from thread and weave styles to drainage and coverage considerations Under the broad umbrella of filter media, there are many synthetic media materials, including woven filter cloths, woven and non-woven fabric…
Lysine (Figure 1) is an α-amino acid used in the biosynthesis of proteins. The compound contains an amino group and a carboxylic acid group. Under biological conditions, the amino group is protonated (–NH3+) and the carboxylic acid group is deprotonated…
When a pump operates inefficiently, or fails all together, the challenge is to make the most economical decision on how to remedy the situation. Some guidance is provided here Centrifugal pumps are widely used throughout the chemical process industries (CPI).…
Chemical process industries (CPI) facilities often present a number of potential respiratory hazards, including airborne particles, toxic chemicals and low-oxygen environments, that may require the use of respiratory personal-protective equipment (PPE). This reference outlines the major categories for respiratory protection…
Allyl chloride (3-chloropropene; Figure 1) is primarily used almost exclusively as a chemical intermediate in the production of epichlorohydrin. A three-carbon epoxide, epichlorohydrin is used in the manufacture of epoxy resins prevalent in coatings, adhesives, and plastics. Epichlorohydrin is also…
Light hydrocarbons in storage tanks can vaporize and vent to the atmosphere, creating harmful emissions. An optimized vapor-recovery unit can effectively and economically reduce such emissions In the chemicals, petroleum refining and natural gas industries, storage vessels are used to…
Presented here are some practical points to help in the selection of a shell-and-tube heat-exchanger design for various applications Heat exchangers are widely used in various sectors of the chemical process industries (CPI), including: chemical; oil and gas; power generation;…
Process hazards analyses (PHAs) are structured reviews during the engineering design process intended to detect potential hazards that were not addressed by the design team. This one-page reference describes commonly employed PHA methods. PHA methods PHAs are often conducted or…