The Netherlands-based startup company Ore Energy (Amsterdam, the Netherlands; www.oreenergy.com) recently announced that it has successfully connected its flagship iron-air battery system to the electric grid in the city of Delft, the Netherlands. It is the first iron-air battery system…
Pyrolysis has received much attention as a technology capable of breaking down waste plastics in recycling processes, but existing pyrolysis approaches often give rise to products with broad molar mass distributions and poor yields. Catalysts can improve yield and selectivity,…
Storing energy to smooth the intermittency of wind and solar power can be accomplished in a number of ways, including mechanical (pumped hydro, flywheels, compressed air and others), thermochemical (phase-change materials and molten salts, for example), chemical (conversion of electricity…
Breaking the stable carbon-fluorine bonds within per- and polyfluoroalkyl substances (PFAS) is one of the most significant challenges in mitigating persistent PFAS pollution. The Hydrothermal Alkaline Technology (HALT; diagram), invented at the Colorado School of Mines (Golden, Colo.; www.mines.edu) and…
Most existing carbon-dioxide removal (CDR) approaches have focused on air, but the volumetric concentration of dissolved inorganic CO2 in surface water is much higher (150X) than its concentration in the atmosphere. Removing CO2 from water could prove to be a…
The production of “green” hydrogen via electrolysis is seen as a key decarbonization pathway for certain industry sectors, but its efficiency can be hampered by a number of factors, including the accumulation of gas bubbles on electrode surfaces within electrolyzers…
Extremely high-salinity water streams present difficulties for many types of processing equipment, such as membranes and filters, and most commercial treatment methods involve thermal evaporators or crystallization, which are energy-intensive and require special anti-corrosion materials. A new membrane-less, non-evaporative process…
A dispenser for abrasive and viscous fluids NEMO dispensers (photo) are designed for precise dosing and metering of abrasive and viscous fluids. With the ability to handle a wide range of viscosities, shear-sensitive materials and entrained solids, NEMO dispensers deliver…
GEA (Düesseldorf, Germany; www.gea.com) is supplying Chugai Pharmaceutical in Japan with a cutting-edge pharmaceutical spray dryer designed and built to meet the highest containment standards. The PSD-3 spray dryer was successfully commissioned in the first quarter of 2025 and represents…
Even seasoned engineers can fall into the trap of trusting valve datasheets too much. In real chemical‑processing environments, “on paper” performance can fall short — especially when factors like backpressure, fluid phase, fire exposure, or piping layout are misunderstood. This…