Latest News: Products
Optimize scheduling with this AI-based system
This company has released Version 2.5 of its Oritames Advanced Planning and Scheduling (APS) system (photo), which incorporates autonomous artificial intelligence (AI) capabilities for improved planning and schedule optimization, as well as improved modeling of sequence-dependent setups, batching and time…
A new non-contact radar gage for liquid-level measurement
The NCR-84 is an 80-GHz radar used for continuous, non-contact level measurement in demanding liquid conditions, including excessive steam, vapor, condensation or surface foam. The signal is focused in a very narrow beam angle, allowing for precise aiming to avoid…
Pressure sensors with capacitive touchpads
The new pressure sensors of the PS+ Series (photo) can be commissioned particularly easily and provide reliable measurements with intuitive operation. Overhead mounting is possible, since sensor heads can be rotated over a range of 340 deg. After the sensor…
Pumps for onboard exhaust-gas cleaning systems
To curb global marine and air pollution, stricter limits on the sulfur dioxide content of marine exhaust gases stipulated by the E.U. and International Maritime Organization (IMO) will apply beginning in 2020. From an engineering point of view, this can…
New control-panel portfolio for challenging installations
The CP600-Pro (photo) is a premium human-machine interface (HMI) control panel that features a true-glass touchscreen and a strong aluminum front frame that ensures IP66 protection. The device can operate in temperatures from –4 to 140°F. Available in five different…
This dust collector has two cartridges and higher capacity
The Quad Pulse Package 2 (QPP2) dust collector (photo) has two main filter cartridges designed to handle air volumes from 590 to 1,765 ft 3 /min. The QPP2 also features a cleanable filter system that allows manufacturers to run continuous…
A comprehensive line of vacuum metrology equipment
The VacTest line of vacuum measurement equipment comprises a comprehensive portfolio of active vacuum gages and controllers to allow a wide measurement range from 1600 to 5 × 10-10 millibars, covering all vacuum levels with accuracy. Both analog and digital…
New options for this biogas flowmeter
The Optisonic 7300 Biogas ultrasonic flowmeter (photo) for the measurement of dry and wet (raw) biogas with variable composition has been updated. Besides the standard temperature sensor, it now features an optional pressure sensor, which is mounted on the flow…
Efficiently reduce agglomerates into particles
The Model LB550 lump breaker (photo) can reduce agglomerates as large as 10 in. (250 mm) into particles with an average size as small as 0.08 in. (2 mm) with minimal heat generation or fines at rates from 2.4 to…
Measure roughness directly in the production process
Whether a surface must be very smooth or show a certain texture or degree of roughness, the new Surface Roughness Analyzer (SRA; photo) precisely pictures the topographic condition of a surface and provides information for optimizing the material or production…