Processes that capture carbon dioxide from industrial fluegas and simultaneously convert it into useful chemicals are desirable because they offer an opportunity to produce CO2-derived chemicals more efficiently and economically than conventional approaches, where costs are driven up by the…
Coil coating is a continuous process for producing prepainted sheets of metal (steel or aluminum), which can then be fabricated into various building and other materials. Because organic coating materials are used, the process requires substantial energy for the curing…
Flashing occurs when the pressure of a fluid passing through a valve is lower than the same substance’s vapor pressure. This causes the fluid to boil — otherwise known as “flashing.” “By reducing flow capacity and eroding the valve itself,…
When searching for catalysts for the energy transition, materials consisting of at least five elements — so-called high-entropy alloys (HEAs) — are considered highly promising. But to find the right combination of elements and composition ratios needed for the best…
The production of substitute (or synthetic) natural gas (SNG) by methanation of CO2 with hydrogen is energy intensive and also requires a purification step to remove the byproduct water and remaining reactants. To address these issues, researchers at The Swiss…
Recovering valuable metals, such as cobalt and nickel, from used lithium-ion batteries is emerging as a key capability because of anticipated high battery demand and material shortages. Researchers at Lawrence Berkeley National Laboratory (Berkeley, Calif.; www.lbl.gov) have developed a technology…
Blue Planet Systems (Los Gatos, Calif.; www.blueplanetsystems.com) and Sulzer Chemtech Ltd. (Winterthur, Switzerland; www.sulzer.com) have announced a partnership to accelerate development of Blue Planet’s process for mineralizing carbon dioxide gas into construction aggregate for concrete. By sequestering CO2 into the…
Production of ammonia by the Haber-Bosch process not only requires a lot of energy for the high-temperature (300–500°C) synthesis of NH3 itself, but the recovery of ammonia takes place by condensation at –20°C. As a result, large changes in both…
Japan’s National Institute for Materials Science (NIMS; Ibaraki, Japan; www.nims.go.jp), along with Harvard University (Cambridge, Mass.; www.harvard.edu) and the University of Connecticut (Storrs, Conn.; www.uconn.edu), have designed a new imaging device that uses structural colors — visible colors that change…
Magnet Metals Bilfinger SE (Mannheim, Germany; www.bilfinger.com) is supporting REEtec AS (Oslo, Norway; www.reetec.no) with engineering, procurement, construction and management (EPCM) services for a new processing plant for neodymium and praseodymium — two rare earth elements (REE) used in the…