South Korea-based SK ecoplant and Bloom Energy Corp. (San Jose, Calif.) announced a sale of Bloom’s electrolyzer technology to deploy hydrogen as an energy source in a large-scale green hydrogen demonstration with the Korea Southern Power Co., Ltd (KOSPO) and…
Petrofac Ltd. (St. Helier, U.K.) has begun a multi-million-dollar front-end-engineering design (FEED) for the Netherlands’ flagship carbon transport and storage (CCS) system, Aramis. The development marks a significant step towards achieving the European Union’s decarbonisation targets announced in the European Green…
TechnipFMC (Houston) has been awarded a major integrated Engineering, Procurement, Construction, and Installation (iEPCI) contract by Petrobras to deliver the Mero 3 HISEP project, which uses subsea processing to capture carbon dioxide-rich dense gases and then inject them into the…
AGC Biologics Inc. (Bothell, Wash.) announced plans to construct a new manufacturing facility at AGC Inc.’s Yokohama Technical Center in Japan. The new site is a part of the company's strategic growth strategy to create more high-quality pharmaceutical development and…
Metso Corp. (Espoo, Finland) and Ferro Alloys Corp. Ltd. (FACOR), part of Vedanta, have agreed on the design and delivery of a ferrochrome plant for FACOR’s expansion project in Bhadrak, Odisha, in India. The contract value of approximately EUR 80…
In November 2023, Heirloom Carbon Technologies (Tracy, Calif.; www.heirloomcarbon.com) unveiled the United States’ first commercial direct air capture (DAC) facility, which can capture up to 1,000 ton/yr of CO2. The process first uses renewable energy to remove CO2 from limestone…
CO2 to CO SK Innovation Institute of Environmental Science & Technology, an R&D organization of SK Innovation Co. Ltd. (Seoul, South Korea; www.skinnovation.com), has successfully manufactured about 1 kg/d of CO using diatomic catalyst (DAC) technology, which selectively converts CO2…
In November 2023, the first commercial test was initiated for a novel, fouling-immune membrane for brackish-water reverse osmosis (BWRO) applications through an early-access program. Membrane developer ZwitterCo (Woburn, Mass.; www.zwitterco.com) says its membrane is fouling-immune in cases where fouling of…
Standard load cells enable mechanical dosing with an accuracy ranging from 0.2 to 1%. This means that you can accurately dose 10 kg down to 20–100 g or 1,000 kg down to 2–10 kg. However, for mixing small product volumes,…
This company is launching a pre-engineered high-rate thickening solution, The HRT-S (photo) is a pre-engineered, high-rate thickener that will allow significantly shorter delivery times. The HRT-S thickener is a part of the company’s Planet Positive offering, enabling savings in power…