The new PCU Series of controllers (photo) connect to thermal mass flowmeters to provide a local display of flow output. Serving as a single- or multi-channel mass-flow controller with up to four channels, the PCU controller supports multiple-unit networked operations.…
This company has introduced a new low-temperature sealing option for its RHPS Series of pressure regulators (photo). Composed of low-temperature-resistant nitrile material, these new seals are designed to maintain a strong seal in cold climates and applications where significant cooling…
Baoli-3 dry-cut pelletizers are designed for processing both hard and soft materials. As with previous Baoli generations, the automated cutting chamber-locking system enables fast handling while supporting operator safety. The company also offers the Pearlo underwater pelletizing system for the…
The K-ML-BSP-150-S Bulk Solids Pump (BSP) feeder (photo) provides gentle feeding of free-flowing granular materials without using screws, augers, belts or vibratory trays to convey the material. Instead, it utilizes positive-displacement action to feed free-flowing materials, offering uniform discharge, consistent…
This company’s auger and vacuum samplers (photo) provide a reliable way to accurately take powder samples safely and hygienically while ensuring that the powder is not contaminated or damaged in the process. The auger sampler uses technology that delivers accurately…
This column is based on “Polybutadiene Production via Solution Process – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/polybutadiene-production-cost. Polybutadiene (also known as butadiene rubber) is produced from the polymerization of 1,3-butadiene. In terms of…
The new Vibration Bottom system (photo) enables safe discharge of powdery, crystalline, fatty and granular bulk materials from hoppers. The lateral, imbalance vibrator sets the vibration bottom in horizontal, circular vibration. Vibrations are transmitted to the materials column via the…
By focusing on ignition sources, such as static discharges, and housekeeping, facilities handling solids can minimize their risk for combustible dust explosions Dust explosions in industrial facilities can cause injuries, destruction of property, and — as history will attest —…
Apart from ensuring the conformity of the process and the quality of the product, professional calibration, first and foremost, improves the quality of the process At many plants in the chemical process industries (CPI), measurement instrumentation is usually calibrated during…
Paying closer attention to the air-filtration systems of pneumatic conveying operations can avoid losses in efficiency in compressed-air usage during filter cleaning The inefficient use of compressed air in solids-handling processes, such as pneumatic conveying, can waste a significant amount…