Compliance with air-pollution regulations requires ongoing effort. Follow these recommendations to assess competing options and optimize system design while minimizing cost and risk The goal of air-pollution control (APC) is to limit the amount of pollutants entering the environment. These…
Implementing microreactors in chemical production is quite a challenge. How these challenges can be met is described here At the heart of a chemical process is the reactor, where the conversion of reactants to products occurs. Depending on the need…
With a focus on flowmeters, this article shows how advances in measurement technologies help safety system designers reduce risk and cost in their safety instrumented systems (SIS) design and lifecycle management Successful implementation and management of a safety instrumented system…
This column is based on “Chlorine Production from Sodium Chloride — Cost Analysis,” a report by Intratec. It can be found at: www.intratec.us/analysis/chlorine-production-cost. Chlorine is among the most important chemical commodities — it is used in the manufacture of a…
Distillation is a critical separation tool for many applications in the chemical process industries (CPI), and the intelligent design of a distillation column can have a large impact on eventual process performance and efficiency. This reference sheet outlines the design…
This column is based on “LLDPE Production via Gas-Phase Process — Cost Analysis,” a report from Intratec. It can be found at: www.intratec.us/analysis/lldpe-production-cost. Linear low-density polyethylene (LLDPE) is a copolymer of ethylene and longer-chain alpha-olefins, manufactured on commercial scale via…
Combustion in industrial burners is a critical operation in the chemical process industries (CPI) for supplying thermal energy for heat transfer, fluid heating, steam generation, distillation, endothermic chemical reactions, metal melting and others. Burners are mechanical devices utilized for mixing…
Follow these recommendations to select the right centrifuge for your application Many chemical process operations require the separation of multiple phases. This can be done in a number of ways, including simple gravity separation, traditional or crossflow membrane filtration and…
Ongoing advances in both adsorbent materials and system engineering allow today’s pressure swing adsorption (PSA) systems to produce nitrogen of varying purities and volumes at relatively low cost compared to cryogenic air separation Nitrogen production that is carried out using…
Electropositive filters take advantage of surface-charge effects to filter nanometer-sized particles. Provided here is an overview of how they work and where they can be used Electropositive filters take advantage of surface-charge effects to filter nanometer-sized particles. Provided here is…