Latest News: Products
Compressors, Fans and Blowers
This cooling fan is rated for use in explosive environments The Ametek Rotron MIL-901XP fan (photo) will not create an ignition source in potentially explosive environments, so it is suitable for use in both indoor and outdoor applications where potentially…
Isolate dust explosions with this updated line of equipment
The Exkop combustible-dust-explosion isolation system provides safe and economic explosion, spark and flame-front isolation. The Exkop system is now available for an expanded range of applications, including those with reduced explosion pressures and larger diameters than were previously served. The…
These membrane modules now boast a larger area
This manufacturer has increased the membrane area of its Bio-Cel BC400 by 4%, and thus changes the name to BC416. The increase in membrane area allows for an optimization of the crossflow, as well as enabling an increased packing density.…
A programmable module enables pre-configured pump parameters
The Intelligent Metering Pump incorporates an Electronic Programming Module (EPM) memory chip on which parameters can be pre-configured. This makes replacement of a drive simple, quick and accurate. Users can simply insert the EPM chip from a previous drive into…
This pelletizer incorporates a number of features
The Primo 200E is said to be particularly well-suited for the compounding of thermoplastic masterbatches with throughputs of up to 1.5 ton/h. The Primo 200E is a single-side mounted, dry-cut strand pelletizer with an extra-large cutting width of 200 mm.…
A new level sensor in a hygienic design
For sanitary applications, this manufacturer has developed a magnetostrictive level sensor in hygienic design. The model FLM-H sensor, is certified in accordance with 3A Sanitary Standards, and measures level in tanks and vessels with an accuracy of less than 0.5…
CFD optimizes this modular range of blowing seal valves
One of the problems faced with blowing-seal type rotary valves is to maintain the air velocity between the valve and the conveying pipe while still achieving a good rotor pocket purge. Designers at this company have solved this problem using…
A float-level transmitter with many fittings options
The NML-308 is a miniature, synthetic float-level transducer suitable for level measurement in vessels up to 48 in. tall. The floats are made from PTFE and the tubes are 316 stainless steel. The fittings are available in PTFE, polyethylene (PE),…
Interphex 2015 Show Preview
Highlighting technology and innovations in the sectors of pharmaceutical and biopharmaceutical manufacturing, Interphex 2015 is taking place April 21–23 at the Jacob Javits Convention Center in New York City. Over 12,000 professionals are expected to visit the event’s workshops, networking…
Tank-cleaning nozzles that can handle lower flowrates
The expanded HydroWhirl Poseidon line of tank-washing nozzles now includes lower flowrates. The nozzles can now handle flowrates ranging from 4.45 to 26.3 gal/min. The smaller-sized nozzles are designed to fit through openings as small as 2 in., while maintaining…