Latest News: Products
A new series of water sensors for nitrates and nitrites
The NT3100sc and the NT3200sc ultraviolet (UV) nitrate and nitrite sensors (photo) are designed with enhanced accuracy and a lower limit of detection at 0.02 mg/L. Leveraging reagent-free UV absorbance technology, NT3 Series sensors are equipped to meet a wide…
A new mid-range temperature sensor for tight tolerances
This company has launched a new specialized thermistor variant aimed at mid-range temperature-sensing tasks for tight-tolerance instrumentation in non-condensing moisture environments. The ENTC-EI-10k9777-02 thermistor (photo) is based on a Stycast epoxy-encapsulated core with Kynar insulation for maximum durability across a…
Low-pressure dense-phase conveyor is stable and reliable
The E-finity (photo) is a continuous dense-phase conveying system for fragile materials. Precise pressure monitoring and airflow corrections allow the system to operate efficiently under all conditions, while gently inducing materials through the conveying line in slug form. E-finity is…
A new converter for HART to Ethernet-APL
The new Ethernet-APL HART Converter (HM-APL-PCB; photo) enables transmitter manufacturers to easily convert existing HART transmitters to the new Ethernet Advanced Physical Layer (APL) interface. The printed circuit board (PCB) can be customized to incorporate special features or size requirements.…
New Profinet gateway for remote system redundancy
The new Profinet Gateways for the LB and FB Remote I/O systems (photo) enable the integration of Ethernet-based process control while providing access to complete diagnostic data. They support communication via HART on the instrument lines, connecting any data from…
Intralogistics systems with reliable, high-efficiency solutions
The new generation of high-efficiency IE5+ synchronous motors (photo) combine the benefits of this company’s modular system of gear units, motors and variable frequency drives (VFDs) with the possibility of reducing system variants through constant torque over a wide speed…
A dosing pump with more features, better performance
With the vipro-PUMP series (photo), this company is launching a totally new generation of dispensers. A new design, optimized dosing components and modular construction provide numerous opportunities for adapting the dosing equipment even more effectively to the relevant application. The…
New single-use pumps for biopharma applications
This company has extended its single-use product line of quaternary (four-piston) diaphragm pumps with the introduction of the next-generation QF5kSU (photo). Incorporating a patented valve-plate design that improves drainability and venting, the QF5kSU reduces the required minimum flowrate needed to…
A smart vacuum pump for mass-spectrometry applications
SmartVane (photo) is rotary vane pump with a hermetically sealed pump housing. The pump serves as a backing pump for mass spectrometers (ICP-MS, LC/MS), for applications in environmental and food analytics, as well as in pharmaceutical and clinical analytics. This…
Better stress distribution with this tool design
This company’s Wright Drive 2.0 socket design is said to distribute contact stress more effectively than other wrench systems. The Wright Drive 2.0 12-point design has up to 10 times more tool-to-fastener contact area than conventional 12-point wrenches. The design…