An experienced engineer who mentors young engineers and a student mentee share their perspectives Mentors provide critical support and guidance to students pursuing an engineering education, and complement coursework aimed at readying a new engineer for the workforce. Mentorships can…
This column is based on “Vinyl Chloride Production from Ethylene and Chlorine – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/vinyl-chloride-production-cost. Vinyl chloride (also known as vinyl chloride monomer, VCM and chloroethene) is an organochloride…
Industrial crystallization processes are widely used in the chemical process industries (CPI) for their ability to separate and purify products in a single step, often to greater than 99.9% purity. Crystal growth proceeds after nucleation, a molecular aggregation process whereby…
Steam often provides the majority of heat, but its quality is not always carefully managed. Here are some tips on how to improve and maintain steam quality Plant operations focus on production activity, maintaining tight control on process algorithms, feedstocks…
This column is based on “Neopentyl Glycol Production Process – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/neopentyl-glycol-production-cost. Neopentyl glycol (NPG; 2,2-dimethylpropane-1,3-diol) is an industrially important and versatile diol, mainly employed as a building block…
Nuclear magnetic resonance (NMR) spectroscopy is an analytical chemistry technique used to elucidate molecular structure and help identity unknown compounds. It is a powerful research tool used for quality control, reaction monitoring, purity analysis and other functions. Nuclear spin The…
There are a number of process technologies available to meet the strict standards for high-purity water in different industrial sectors It is easy to think that the water coming out of our faucets can be used anywhere. Although potable water…
Today’s detection equipment can provide early sensing of H2 gas and flames, provide alarm information to a fire- and gas-safety system controller to initiate mitigating measures, and integrate with process control to further minimize H2-fire risk Hydrogen is the most…
This column is based on “Polyoxymethylene from Methanol and Acetic Anhydride – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/polyoxymethylene-production-cost. Polyoxymethylene (also known as POM and polyacetal resin) is a thermoplastic polymer fiber. Owing to…
Use the strategies discussed here to maximize the yields of solid products from batch drying vessels Successfully drying a wet solid in a drying vessel does not complete the operation — the dry solids must be removed from the vessel.…