Latest News
New two-level terminals for 4-mm2; cross-sections
This company has introduced new space-saving two-level terminals for rated wire cross-sections up to 4 mm². The compact PRKD 4 terminal blocks and the corresponding PSLD 4 PE terminals (photo) are available with two or three ports per level and…
New compact, variable-speed reciprocating compressors
The new i.Comp 8 and 9 oilless compressors (photo) are available in two sizes and three configurations (G, Tower and Tower T). The i.Comp units deliver oil-free air at up to 160 psi and 20 ft3/min. The direct-drive motor and…
Preventing Dust Explosions with Flow Analysis
Dust collection systems are often designed using simple rules of thumb that may not be sufficient for proper operation. Flow analysis can ensure that the systems meet requirements The presence of dust is one of the many potential causes for…
These pumps can handle challenging solid materials
The Vortex Series of pumps (photo) are designed for handling abrasive wastes. Using a recessed impeller design, the series combines the efficiency characteristics of a self-priming pump with the solids-handling capabilities of a chopper pump. This makes it suitable for…
Heat recovery saves energy with this compressor setup
When this company’s heat-recovery components (photo) are installed onto an air compressor, up to 94% of the energy used to compress air is recovered. This recovered energy can be used to heat storage and operating areas or for heating water…
Methane Reforming: Solving the Hydrogen Blues
Improved catalysts and reconfigured reformer designs make steam-methane reforming the most scalable, industry-ready source of ‘blue’ H2 For many decades, steam-methane reforming (SMR) has been, and still is, the technology of choice for the large-scale production of synthesis gas (syngas;…
The Next Generation of Overpressure Protection
Overpressure protection is at the center of process safety across all chemical processing sectors. As processes and technologies evolve, it is essential that safety systems can adapt to provide the utmost levels of protection All over the chemical process industries…
GF Piping and neustark partnering on CO2 removal and storage projects
GF Piping Systems (Schaffhausen, Switzerland) has started a collaboration with neustark (Bern, Switzerland), a climate tech company specializing in removing CO2 from the atmosphere and permanently storing it in demolition concrete. To limit the increase in global average temperature to…
Arkema to launch new purification technology to cut emissions in acrylic production
By 2026, Arkema S.A. (Colombes, France) will implement a new, patented purification technology at its production site in Carling, France, to improve the site’s operational efficiency and environmental footprint toward the highest standard. This investment will enable to reduce the…
IOCL awards propylene purification contract to Nuberg EPC
Nuberg EPC (New Delhi, India), a global engineering, procurement and construction (EPC) company, has been awarded the PPP contract by Indian Oil Corporation Ltd. (IOCL) for the design, engineering, manufacturing, supply and commissioning of a Propylene Purification Package at IOCL…