Mobile Navigation

Latest News

Continuous processors quickly mix fast-reacting materials

This company’s Continuous Processors (photo) feature a proprietary design that ensures the fast-reacting materials used to process rigid polymeric foams are mixed, gelled and reacted entirely within the sealed reactor barrel before they begin to cure. Allowing foam formation and…

Point-to-point, wireless I/O modules for remote locations

With a rugged NEMA 4X/IP68 industrial housing, the new VWB2000 signal-wire replacement system (photo) is a point-to-point wireless signal bridge that takes analog, discrete, or Modbus signals at one location and reproduces them at a second location. The system consists…

Cutting cost and preventing damage with two valves in one

The RTK Discharge and Pump Protection Control Valve (photo) provides a suitable solution for all industrial processes that incorporate pumps, such as condensate pumps, boiler feedwater pumps or low-pressure centrifugal pumps. The RTK control valve works as two valves in…

Diaphragm globe valves that integrate into multi-port blocks

This company now offers solutions for manufacturing diaphragm globe valves with plug diaphragm (PD) design as multi-port valve blocks made from stainless steel (photo). It is possible to configure multi-port valves with diaphragm globe valves on a case-by-case basis according…

Leak detector for easy and accurate ‘sniffing’ operations

This company has launched the ASM 306 S (photo), which addresses any industrial leak-detection “sniffing” applications, especially in refrigeration and air-conditioning processes. This new leak detector is highly sensitive (10 –7 mbar L/s), precise and accurate. Leakage control using sniffing…

Access and control flowmeters from a smartphone

Edge Flow Electronics (photo) interface with positive-displacement or turbine flowmeters to provide better access, understanding and control of processes — in some cases, from a smartphone. When installed on a flowmeter, Edge devices can force the sensor to output a…

Member Exclusive

Controlling Reboilers Heated by Condensing Steam or Vapor

Methods for controlling reboilers in distillation towers are central to good reboiler operation and tower stability. Control valves can be located in the steam-inlet line or in the condensate-outlet line. This article updates guidance for key considerations and practices using…

Member Exclusive

Technology Profile: Isopropyl Alcohol Production from Acetone

This column is based on “Isopropyl Alcohol Production from Acetone – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/isopropyl-alcohol-production-cost. Isopropyl alcohol (also known as isopropanol or 2-propanol) is a colorless and flammable liquid with a…

Seal Considerations to Reduce Fugitive Emissions

By understanding the basics of industry standards, such as API 682, plants can make great strides in controlling fugitive emissions related to equipment seals Chemicals that unintentionally leak from equipment into the atmosphere are known as fugitive emissions. These gases…

A Simplified Approach to Crystallization Mass Balances

In continuous crystallization, it is often challenging to accurately measure mass flowrates, but the method described here enables a simpler path to a balanced crystallization process To gain optimal value from industrial crystallization processes, it is clear that understanding specific…