This column is based on “Nitrobenzene Production from Benzene – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/nitrobenzene-production-cost. Nitrobenzene is an important chemical intermediate. More than 95% of nitrobenzene is used in the production of…
This one-page reference describes how to measure the capability of a given centrifuge to separate solids from a liquid phase. G-force The centrifugal force developed by a centrifuge is expressed as a multiple of the force of gravity. This force,…
Understanding the effect of flowrate, velocity, density, viscosity, pressure drop, friction, components and sample line sizes will help you design a sampling system The primary goal when designing an analytical sampling system is to ensure timely, accurate measurements. The sooner…
This primer provides guidance on key aspects to consider when designing and specifying evaporators, which are used in a diverse array of industrial sectors Industrial evaporators are used to remove a solvent from a non-volatile solute to obtain a concentrated…
Engineers must refine their foundational understanding of process safety in order to avoid common misconceptions about safety instrumented systems, including safety integrity level (SIL) definitions Learnings from major industrial process accidents occurring over the past half century have driven awareness…
This column is based on “Ammonium Nitrate Porous Prills Production Process – Cost Analysis,” a report published by Intratec Solutions. It can be found at: www.intratec.us/analysis/ammonium-nitrate-production-cost. Ammonium nitrate (NH4NO3) is one of the most commercially important ammonium compounds, both in…
Controlling and reducing particulate matter pollution from industrial operations is a key environmental and human health objective. In chemical process industries (CPI) facilities, airborne particulate matter can result from combustion of fuels, or from process operations, such as dust from…
Normalized profitability metrics provide a basis for comparing the efficiency of capital investments, but they are often misunderstood. New interpretations of these metrics can help engineers to make more informed decisions In a financial sense, a large capital project can…
Although waste is unavoidable in industrial processes, many companies are turning toward business strategies that seek to treat waste with minimal environmental impact — or even better, prevent waste altogether In the past, waste was simply discharged without any treatment.…
This column is based on “Ethylene Oxide Production from Ethylene – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/ethylene-oxide-production-cost. Ethylene oxide (also known as EO, oxirane and epoxyethane) is the simplest cyclic ether. Because it…