In hygienic process operations, proper system construction and fabrication has the greatest influence on end-product quality and the success of process validation. Even well-designed hygienic systems can be compromised by leaching, poor internal finishes and mishandled material sourcing and other…
This column is based on “Calcium Carbide Production from Limestone – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/calcium-carbide-production-cost. Calcium carbide is the most industrially relevant carbide because of its important role as the basis…
As shown here, economical cooling is often achieved with a combination of both air and water cooling. Design considerations are also presented here For the last 40 years, air-cooled heat exchangers have become an indispensable part of many chemical, petroleum-refining,…
A solid grasp of pump sizing allows engineers to make effective economic and practical decisions about process pumps. This one-page reference provides information about two key parameters and other considerations for pump sizing. Pump sizing steps Sizing a pump requires…
This column is based on “Oxygen Production – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/oxygen-production-cost. Oxygen is a nonmetallic element and one of the most abundant elements on Earth’s surface. Under standard pressure and…
A methodology and examples for estimating equipment costs are presented Engineers have the responsibility to create projects having attractive returns on investment and to create economically sound designs — designs that produce high-quality, competitively priced products. This requires the technical…
New technologies can provide competitive advantages compared to established processes, but significant effort is required to transition a promising concept into a commercial reality Many students study chemical engineering with the aspiration of someday inventing an innovative process that could…
DSD is a new design-of-experiments (DOE) technique that is expected to bring huge benefits when using a Six Sigma optimization strategy Statistical tools are deeply ingrained in the Six Sigma methodology to optimize processes and products during chemical process industries…
The ideal gas law ( PV = nRT), relating molar volume of a gas to pressure and temperature, is predicated on two assumptions: 1) that the volume occupied by the gas molecules is negligible compared to the volume of the…
This column is based on “HDPE Production via Slurry Loop Process – Cost Analysis,” published by Intratec. The report can be found at the following URL: www.intratec.us/analysis/hdpe-production-cost. High-density polyethylene (HDPE) is one of the three main types of polyethylene, and…